Release notes for Launcher (P21) v 3.4 - 21 Dec. 2006
********************************************************************

About the Appliance Launcher
----------------------------
The Appliance Launcher is a Windows utility that makes it easy to
make contact and give initial configurations to selected Intermate
network devices.  One of the most important reasons for using the 
Appliance Launcher is that it allows a user or technician "in the 
field" to make contact with a network device and perform basic 
configuration. As a solution administrator, you do, however,
have the responsibility to provide the user with the settings to
be used. Intermate provides "Settings sheets" to help you structure
information for the user.

To use the Appliance Launcher, the PC running it must be on the same
physical network as the Appliance itself (through a hub or switch - 
or directly attached to the appliance with a cross over cable). The 
Appliance Launcher uses UDP and is therefore independent of the IP 
settings of the PC and the appliances to be discovered.

********************************************************************
********************************************************************

This Release:
-------------
- Version 3.4 (build 324) adds support for the SIG6e, WinSIG6.
  All previously listed products are still supported.

Release History
====================================================================
- Version 3.4 (build 324 adds support for
  * SIG6e
  * WinSIG6

- Fixed a problem with showing the same appliance several times.
  Setting Device Name was not possible on a SIG5e Appliance.
  Checkmark to preserve password was not available for SIG5e.

- removed screen numbers

--------------------------------------------------------------------  
- Version 3.3 (build 320) adds support for 
  * SIG5e

--------------------------------------------------------------------
- Version 3.2 (build 319) adds support for
  * Printer Monitoring Gateway (PMG)
  * All models of the Intermate Advanced Print Server (IAPS) 
  * Basic Box component
  The product still supports
  * TrustGates and similar products
  * Secure Industrial Gateways - SIG5 and SIG300, and 
    similar products.

--------------------------------------------------------------------
Version 3.1 covers up to and including build 311.
  - minor changes and bug fixes

--------------------------------------------------------------------
Version 3.0 covers builds 164 and 205

- Support added for Secure Industrial Gateway (SIG5 and SIG300)
  and similar products.
  Because the Launcher is now a multi-product tool, the name was 
  changed from TrustGate Launcher to Appliance Launcher.
  
- Option for preserving a factory default password.

- In build 169 (replaces build 164) you can now automatically copy 
  settings to your clipboard for use in your own documentation.

- Build 205 was created for technical reasons. There are
  no changes in functionality.

------------------------------------------------------------------
Version 2.0 introduces support for GateManager and for using DNS 
host names for Easy Tunnel and GateManager servers. 

It is now possible to freely pick and choose which of the 
following parameters to configure:
- LAN interface
- DHCP on LAN, and DNS on LAN (advanced options)
- WAN interface
- EasyTunnel 
- GateManager 

In addition, V 2.0 includes four completely new functions:
- You can reset factory defaults (advanced options).
- You can set a new user-configured individual password (advanced 
  options).
- You can connect to the appliance without having to go through 
  all the screens in the Launcher (advanced).
- You can use various start options when you run the Launcher 
  from the command prompt (tglauncher.exe /help).

In V1.0 you can choose between two modes: Initial Contact Only 
(LAN Interface) and EasyTunnel Client 


********************************************************************
********************************************************************
NOTICES 
********************************************************************

COPYRIGHT

This software is a tool to be used for managing appliances driven by 
Intermate software. You may copy this software to any number of PCs 
for this purpose, and may not use it for any other purpose. 

The software is protected by U.S. and international copyright law.  
You may not rent, lease, sell, modify, decompile or reverse engineer 
this software.

DISCLAIMERS

The following provisions do not apply to any country or state where 
such provisions are inconsistent with local law. Some authorities 
do not allow disclaimer of express or implied warranties in certain
ransactions, therefore, the following may not apply to you.

Intermate A/S makes no representation or warranty regarding the 
content of this product. For example, Intermate A/S does not warrant 
that the software or documentation are "error-free" or will meet the 
needs and requirements of a particular user. All information in the 
software and documentation is subject to change without notice. 

All other warranties, representations, conditions, express or implied, 
including any implied warranty or condition of merchantibility or 
fitness for a particular purpose are disclaimed by Intermate A/S. All 
other implied terms are excluded. 

Intermate A/S disclaims any liability for damages arising from the 
use of this product or any other damages, including (though not limited 
to) lost profits or data, special, incidental, or other claims, even 
if Intermate A/S has been specifically advised of the possibility of 
such claims.