Quick Guide for the Intermate LAN FS3 Multi-Protocol Print Server ===================================================================== Version 4. 25 April 2003. K92-2491 code level or higher. Purpose ====================================================================== The Quick Guide is meant to help you when you can't get ahold of the full documentation or find it too inconvenient to use it. There are, however, many important topics in the full documentation which cannot be handled in this Quick Guide, especially information on how to utilize "logical printers",the Network Destination Option (NDO, with Network Printers), and the Host Print Options (HPO) for printing from IBM hosts using IPDS, SCS TN3270E or SCS TN5250E. In addition, except for the "Main Status Pages", there is no information on management, monitoring and maintenance in the Quick Guide. Topics covered in the Quick Guide ====================================================================== A. LED Patterns in Various Modes B. The TEST Button used for Status & Quick Guide - and for Resets C. Activation of New Settings Requres Rebooting D. Getting IP-connected: First-Time Contact E. Raw Socket Printing from a Windows 2000 to a Local Printer F. Check-list for Configuration G. Trouble-Shooting List of full documentation ====================================================================== - These are all pdf files you can get from our web-site or from the CD-ROM packed with your print server: * Product Overview (also printed on a sheet) * Getting Started (also printed as a brochure) * Server Administration Guide * Printing Environment Guides for IBM Midrange (under OS/400 - AS/400 and i-series) IBM Mainframe (under IBM MVS - for example S/390) AIX OS/2 Windows (various environments) Apple Novell Netware (discontinued in code levels after K92-1491) - You can also find utilities on the CD-ROM and on our web-site. Where to Get Updates of Firmware, Special Files and Documentation ====================================================================== http://www.intermate.com Choose Support and then the "Support Site" for this product. Contact ====================================================================== Intermate A/S Kongevejen 194A DK-3460 Birkeroed Denmark Tel: +45 7226 0400 Fax: +45 7226 0404 sales@intermate.com support@intermate.com A. LED Patterns in Various Modes ====================================================================== Upper LED is yellow - "Activity". It is lit when data is received and turned off when no data is present. Bottom LED is green - "Link". It is lit when a link is established with the LAN. If the link is lost, the LED is turned off. Power Up Mode: Activity On & Link Off = Powering Up Activity Off & Link On = Unit is Ready Normal Operation Mode: Activity Off & Link On = On-line with LAN Activity Flashing & Link On = LAN traffic detected Both Off = no LAN detected / off-line Download mode with Intermate Download Utility & Serial Cable Activity On & Link Off Download mode via FTP or FTP controlled by the IMCU Activity Flashing and Link On "Programming Flash Memory": This mode occures during boot after download of new firmare,file, etc. Both On = programming in progress. When the programming is done, both lights will turn off after which you will see the display for normal operation mode. B. The TEST Button used for Status & Quick Guide - and for resets ====================================================================== The TEST button is located on the LAN FS3 next to the LEDs. It is operated with a pen or similar pointed object. 1) While printer reports Ready, press and hold: less than 4 seconds: Print Main Status Pages (often called Status Pages for short) These pages describe all current configurations, firmware level and the content of the System Log (errors, etc).since the last reboot. more than 5 seconds: Print this Quick Guide 2) You can use the TEST button to restore factory default settings. Before proceeding, the printer must be warm. When the printer displays Ready, turn it off. Press the button and hold while powering On: Up to 30 seconds: Reset the IP address, subnet mask & default gateway (default for each is 0.0.0.0) at least 41 seconds: Reset factory all defaults including IP address, subnet mask & default gateway. If the reset is successful,a confirmation page will be printed out. C. Activation of New Settings Requires Rebooting ====================================================================== To activate any new setting, the unit must be rebooted. Rebooting resets the information in the System Log. So it can be a good idea to print out the Main Status Pages before rebooting. You can do a hardware reboot by powering the printer Off, waiting about 10 seconds, and then powering On. Remote rebooting: There are three methods: the HTTP-menu; Telnet; IMCU. All are shown in examples below. D. Getting IP-connected. First-Time Contact =========================================== Once the unit has an IP address other than 0.0.0.0, you can log on to it with a web browser or via Telnet for configuration, management and monitoring. This section tells you how to establish first-time contact. Information you need to have ready =================================== Unless you will be setting the IP address via the front panel display, you need to know the MAC (hardware) address of the unit. You can find the MAC address on the Main Status Pages. In the examples we will use 00c0a200801e. You must have the following information from (or cleared by) your network administrator: * IP address - in the examples we will use 192.168.0.227 (DHCP: You need a temporary static address; see later). * Network Mask - in the examples we will use 255.255.255.0 (DCHP: Not necessary) * Default Gateway (unless Auto-Routing (RIP) is used). (DCHP: Not necessary) Host Name --------- You must choose a host name which will identify the unit in the the LAN environment.The unit will generate a default host name by attaching the last six digits from the MAC address to a prefix such as IM or IMA (depending on the product and model). You may use, modify, or totally replace this name. If you do, please observe the following rules. * Name length: minimum 2 and maximum 16 ASCII characters. * No blank or character spaces; no underscores. * There is no distinction made between upper and lower case. * You can make the name DNS qualified by adding a company domain name and a top domain, for example im00801e.mycompany.com. * Permissible characters: alpha (A-Z), numberic (digits 0-9), minus sign (-), and period (.) * Periods are only allowed when they serve to delimit components of DNS qualified names ("domain style names"). * The first character must be alpha. * The last character must not be a minus sign or a period. Finally, you may need to know the IP address of the work station from which you will be configuring the unit. Tip for Windows users: Use the following command in the command modeto find this IP address: Windows 95/98: winipcfg NT / Windows 2000: ipconfig Choosing a method ================= The methods available for setting the IP address vary depending on how your LAN environment is administered. When we discuss choosing a method, we are talking about the administration, and NOT the print platforms you will be using. In fact, some of these platforms, notably IBM Mainframes and Midrange (such as S/390 and AS/400) have no management facilities of this type. This is no cause for concern. Most LANs are administered from a Windows work station,an OS/2 work station or a work station running UNIX, AIX or Novell Netware. List of methods D0. IP address set on the front operator panel. If the local printer has an appropriate operator panel, this is often the most convenient method, but it should not be used if your system adminstrator requires the use of a BOOTP server or an RARP server. D1. IP address via ARP and PING. ARP does not work across routers. Can be used in any of the LAN management environments mentioned,but should not be used if your system adminstrator requires the use of a BOOTP server or an RARP server. D2. IP address via the management and configuration utility (IMCU). Can only be used for managing from a Windows work station. Because the IMCU detects network devices at the hardware level you can set an IP address for a segment unreachable from your work station, do all or most of your configurations, and then move the LAN FS3 to the segment containing that IP address. D3. IP address via a BOOTP-server. Novell Netware, AIX, UNIX, AIX, OS/2. D4. IP address via a RARP-server. RARP does not work across routers. UNIX only. D5. IP address via a DHCP-server. You must use D0, D1 or D2 to assign a temporary static IP address before setting the unit to use DHCP from that point on. To use a method that does not work across routers, you must ensure that the LAN FS3 you want to make contact with is on the same network segment as the workstation. Consult your network / system administrator are in doubt. D0. Setting the IP Address via the Front Panel Display ======================================================= 1. Press the "Mode" button and press "+" or "-" until the display reads "Interface". 2. Press "Enter" and press "+" or "-" until the interface type reads "Option #". If your printer has multiple ports, "#" is the option slot number. 3. Press "Enter" and press the ">" button until "DHCP" is displayed. 4. Press the "+" button once to display "IP Address". 5. Press "Enter". Use the ">" and "<" buttons to toggle between the address digits and the "+" and "-" buttons to adjust the values. 6. Press "Enter" to save the address. 7. The Subnet Mask and the Gateway address are set similar to the IP address. Repeat steps 4, 5 and 6. Leave the Gateway address at 0.0.0.0 to use auto-routing. 8. Press the "Mode" button, wait a moment and power the printer Off and On to activate the new IP settings. 9. Log on to the LAN FS3 with a web browser or via Telnet as user "admin" with the password "admin". http://192.168.0.227 Or telnet 192.168.0.227 10. Select TCP/IP. 11. Disable RARP and BOOTP. 12. Save the new settings and reboot the LAN FS3. The unit is now ready for further configuration. D.1 IP address via ARP and PING =============================== 1. Make sure the LAN FS3 is connected to the LAN and that it and the printer both are powered On. 2. Check the current IP number for the LAN FS3 on the Main Status Pages. Print them by pressing the TEST Button for 3-4 seconds. 3. If the IP address is different from 0.0.0.0, you must reset it. See section B.2. 4. Insert the relationship between the new IP address and the hardware (MAC) address in your terminal's ARP cache. From OS/2, UNIX, AIX: arp -s 192.168.0.227 00:c0:a2:00:80:1e From Windows 95/98, NT and Windows 2000 arp -s 192.168.0.227 00-c0-a2-00-80-1e 5. Ping the new IP address to store it in the LAN FS3. ping 192.168.0.227 6. Wait for the LAN FS3 to reboot automatically. 7. Log on to the LAN FS3 with a web browser or via Telnet as user "admin" with the password "admin". http://192.168.0.227 Or telnet 192.168.0.227 8. Select TCP/IP. 9. Set the Subnet Mask. 10. If Auto Routing (RIP) is not used in your network environment, you must also set the Default Gateway as instructed by the network administrator. 11. Save the new settings and reboot the LAN FS3. The unit is now ready for further configuration. D2. IP address via the IMCU ============================ The Intermate Management and Configuration Utility (IMCU) is a web- based tool for management and configuration of Intermate print servers in small to large-scale IP networks. The system consists of an HTTP-based Windows NT service, with software agents distributed across the network to communicate with print servers on each physical LAN. This approach enables a network/printer administrator to configure devices with mis- or unconfigured IP settings anywhere in the network, using a standard web browser. Limited SNMP support is available for monitoring third party or legacy Intermate print servers. System Requirements: * IMCU Server: Windows NT 4.0 (server or work station); Windows 2000 or Windows 9x. TCP/IP must be installed. * Agent: Each agent runs on a host. If this host is a pc, the system requirements are as described for the IMCU server. You can also activate the embedde agent on an LAN FS3. If you have questions after you get logged on to an IMCU server, try the extensive help file (it opens in a new browser instance when you press the question-mark icon), or consult the Server Administration Guide for the LAN FS3. Installing an IMCU server (if you don't already have access to one) =================================================================== The IMCU installation program (P19-xxxx.exe) is found on the CD-ROM but if you can't find it, or think that the CD-ROM is getting obsolete, download it from www.intermate.com/imcu.htm. Remember that you must be logged on to the computer with a Windows NT account with administrative rights if you will be installing on Windows NT, Windows 2000 or Windows XP. The installation program will give you the possibility of installing a server, an agent, or both. It is a good idea to choose both, especially if the machine is on the segment where you will be installing the LAN FS3, because you will then have an agent that can detect the unit. You can always remove the agent later. During installation, the program asks for a port number for the server (default is 80). Change the port number if another service already uses it. Tip: You can check to see the ports your pc is listening to by using the command netstat -an. Using an IMCU Server to contact your (new) LAN FS3 ======================================================= 1. Power On the printer in which the LAN FS3 is installed. 2. Attach to the IMCU server with a web browser. If the IMCU server is not on your own work station: Example: http://192.168.0.38 (default port) http://192.168.0.38:81 (alternative port) If the IMCU server is on your own work station: http://127.0.0.1 (loop-back local address, default port) http://127.0.0.1:81 (loop-back local address, alternative port) 3. Log-in. Default user name/account is imcu. Default password is imcu, but it may have been changed by whoever it was that installed the IMCU server, so check with them. The password is case-sensitive. 4. Now you have to find your LAN FS3 using its MAC address. What happens next depends on whether or not there is already an "agent" on the segment on which the Intermate 100 is currently placed. If there is not, proceed to step 5. If there is, jump to step 6. 5. You need to create an agent for the segment on which the LAN FS3 is currently placed. There are three paths to choose from. (a) If you have a previously installed Intermate print server on the segment, you can log on to it and choose [IMCU Agent] > Enable. Save and reboot. Return to the IMCU Server, select Agent Management (the icon with a drawing of a sneaky-looking cigarette-smoking man). Select New. Fill out the necessary information and then select Add. The necessary information is: * IP address of the print server hosting the agent. * Agent Name (unless you are satisifed with the host IP address as the agent name). Leave the port alone (8888). * You will probably not want to change the refresh or timeout intervals; check the on-line help if you are in doubt. (b) If this is the first Intermate print server on the segment, you can do a "remote" agent installation if both the IMCU server and the pc which is to host the agent are running NT 4 or higher (Windows 2000, Windows XP). Select Agent Management (the icon with a drawing of a sneaky-looking cigarette-smoking man). Select New. Fill out the necessary information and then select Install.The necessary information is: * IP address of the pc to host the agent. * Agent Name (unless you are satisifed with the host IP address as the agent name). Leave the port alone (8888). * You will probably not want to change the refresh or timeout intervals; check the on-line help if you are in doubt After you select Install, you will be asked to enter a Windows NT account with administrative rights on the pc. You must enter Domain, Username, and Password. Click Install. (c) If neither (a) nor (b) applies, you will have to install an IMCU agent directly on a pc on the desired segment, for example your own work station. Perform this installation with the IMCU- Installation Program, choosing "Agent Only". Afterwards, return to the IMCU server. Select Agent Management (the icon with a drawing of a sneaky-looking cigarette- smoking man). Select New. Fill out the information shown in 5(b). Finsh by selecting Add (instead of Install). 6. Click on the Device List icon (looks like a stack of floppy disks). 7. Find the relevant agent. Use the Expand icon to bring forth the list of network devices discovered by the agent. Refresh the list with the refresh icon (not your browser's refresh). If the MAC address for your LAN FS3 does not show up, read in the help file and check your work for mistakes. 8. Double-click on the MAC address for your LAN FS3. Assign the new IP address, subnet mask, and Default Gateway (if Auto- routing (RIP) is not used in your environment). Disable BOOTP and RARP. Let DHCP stand as not enabled unless you are using this procedure as a preparation for using DHCP assignment after the initial contact. Click "Save and Reboot". The LAN FS3 is now ready for further configuration. If you like, you can attach to it from the list of devices discovered by the agent; just click on the IP-adress. D3. IP address via a BOOTP-server ================================= 1. Make sure that the printer and the LAN FS3 both are powered Off. 2. Insert the following sequence in the bootptab file on the host. Syntax (written on a single line; if you need more room, you can usually use backslash at the end of each line to indicate that the definition continues) : ht=: ha=: hn: ip=: sm=: gw= Example: íma00801e: ht=ether: ha=00c0a200801e: hn: \ ip=192.168.0.227: sm=255.255.255.0: gw=192.168.0.1 3. On platforms other than OS/2, you may need to reinitialise the BOOTP-server every time you make changes to the [ /etc/bootptab ] file in order to be sure the changes take immediate effect. For the AIX platform, however, it is sufficient to refresh the intetd subsystem. Syntax: refresh -s inetd. Refer to your system's documentation. 4. Power on the LAN FS3 and the printer. 5. Log on to the LAN FS3 with a web browser or via Telnet as user "admin" with the password "admin". http://192.168.0.227 Or telnet 192.168.0.227 6. Select TCP/IP. 7. Disable RARP and DHCP. Note that the BOOTP delivers not only the IP address, but also the subnet mask and the default gateway. 8. Save the new settings and reboot the LAN FS3. The unit is now ready for further configuration. D4. IP address via a RARP-server (UNIX only) ============================================ 1. Make sure the LAN FS3 is connected to the LAN and that it and the printer both are powered Off. 2. Add the following line to the /etc/rarpd.cf file. Syntax: Example: 192.168.0.227 00:c0:a2:00:80:1e or the following line to the /etc/ethers file Syntax: Example: 00:c0:a2:00:80:1e íma00801e 3. Update your host table and alias name databases. 4. Start the RARP daemon, if is not already running. rarpd -a 5. Power On the LAN FS3 and the printer. 5. Log on to the LAN FS3 with a web browser or via Telnet as user "admin" with the password "admin". http://192.168.0.227 Or telnet 192.168.0.227 6. Select TCP/IP. 7. Set the Subnet Mask. 8. If Auto Routing (RIP) is not used in your network environment, you must also set the Default Gateway. 9. Disable BOOTP and DHCP. 10. Save the new settings and reboot the LAN FS3. The LAN FS3 is now ready for further configuration. D5. IP address via a DHCP-server ================================== 1. Assign a temporary static address using ARP/PING or the IMCU. 2. Log on to the LAN FS3 with a web browser or via Telnet as user "admin" with the password "admin". http://192.168.0.227 Or telnet 192.168.0.227 3. Select TCP/IP. 4. Disable BOOTP and RARP. 5. Enable DHCP. 6. Save the new settings and reboot the LAN FS3. The LAN FS3 is now ready for further configuration. E. Raw Socket Printing from a Windows 2000 to a Local Printer ====================================================================== If you just want to print raw socket, LPR or IPP to the printer to which the unit is attached, your LAN FS3 is ready to be used without additional configuration. But you do, of course, need to define a printer on the host side. The following instructions are for setting up a Windows 2000 work station so that its user can send a job for processing by the LAN FS3 using a Raw Socket protocol (also known as Port 9100 or Reverse Telnet). Choose Settings > Printers > Add Printer. Follow the instructions given by the "Add Print Wizard". The important things to notice are listed below. 1. Choose local printer (yes, local). 2. Add a new port. This is defined as a combination of a given IP address (in our example 192.168.0.227) and a port type. Available port types are displayed on the "Type" pull down list. At this point, you cannot directly specify Raw Socket, but must choose the heading "Standard TCP/IP Port"; you may have to scroll down a bit to find this heading on the list. Choosing this port type starts the "Add Standard TCP/IP Printer Port Wizard". 3. As you type in the IP address for the LAN FS3, the wizard will generate a Port Name consisting of the IP adress pre-fixed with the tring "IP_". You may change the name. 4. When asked for additional information about the device types, choose "Standard: Generic Network Card". Its default settings are SNMP activated with the Raw/Port 9100 protocol. 5. You will be returned to the Add Printer Wizard, where you will indicate the manufacturer and type of printer. If you already have a printer definition for this printer type, keep the existing driver (you can always change it later - see %% below). 6. You will be asked to "Name Your Printer." If you have several different "printer" definitions for the same physical printer in your network, choose a name which will help to keep track of them. Tip: The definition of a "printer" consists of three elements: a) a physical printer from a specific printer manufacturer and of a specific type or model, with a specific IP address; b) a specific driver to be used; c) the port name to be used. 7. Choose "Do not share" this printer. 8. Choose "No" test page, click "Next" and then "Finish." %% If you need to adjust or add information to the printer definition, choose Settings > Printer; right-click on the new printer you have defined, and choose "Properties". This is much safer than trying to set everything in connection with "adding" the new printer. Note: The tasks described here for Windows 2000 are the same as those needed for Raw Socket printing from Windows XP and Windows Millenium, although there are differences in what some of the parameters are called and how they are placed in the menu and wizard flows. Consult the Printing Environment Guide for Windows if you want to use other protocols in any Windows environment and/or if you want to print using Raw Socket from a pc running Windows 9x or NT 4.0. We have a free utility with which you can create the necessary IP port or ports to handle Raw Socket and/or LPR queues running Windows 9x, as well as Raw Socket running NT 4.0 (which has a native LPR port). F. Check-list for configuration ====================================================================== There are many concepts in this check-list which are not explained. If you are in doubt about their meaning, please consult the full documentation. The default password is admin and the password is admin. Configure the remaining parameters in the TCP/IP configuration group. Host name is mandatory. DNS server is where the Intermate100 makes look-ups if you enter names instead of IP addresses for various servers and hosts in other configurations. Registering a WINS server makes your Intermate100 known to an NT environment. Configure the General settings & Network settings. Change the password. Enter your license key if you have purchased one or more of the available options: Network Destination Option (NDO); Host Print Option (SCS TNe and/or IPDS). If your point-of-purchase has already installed a Software Key, it will be written on back panel. If you get a key yourself, we recommend that you write it on the back panel. Configure one or more Target Printers: * Configure the Local Printer; this is the physical printer to which the LAN FS3 is directly attached. * If you have the NDO, configure up to four Network Printers. Note: Network printers should support the status information nodes defined in the Printer MIB (RFC1759) and some host information nodes of the Host Resources MIB (RFC1518). Printers without this support can be used,but no useful monitoring information will be provided in the LAN FS3's "Target Printer Information". In order for a print job to reach a Target Printer, it must be born by a Logical Printer. More information on this below, under "About Service-Configuration" and under "Configuration Tips". Configure the status monitoring aid of your choice from among e-mail notification, SNMP and enabling of the embedded IMCU agen. Configure the services you want to use from among the following possibilites: * IPP (Internet Printing Protocol) * Raw Socket TCP Port (up to 4) * LPR queue (up to 8 configurable; there are also 4 non-configurable) * FTP * Novell Netware (discontinued after K92-1491) * IPDS * TN5250E (actually host-sessions - up to 4) * TN3270E (host-session) See the checklist below concerning configuring a service. Remember that it is necessary to reboot in order to activate new settings. Finally, it is always a good idea to document your configurations by printing the Main Status Pages (see section B in this guide). "Host-Side" Printer-Definition ------------------------------ For each service, you must configure one or more printer-definitions (often just called "printer") on the host(s). Host = origin of a print job sent to the LAN FS3. The printer-definition will act as a client to your multi-protocol print server. You may need to cycle back and forth a few times to coordinate the settings on the LAN FS3 with the host printer-definition(s). About Service-Configuration on the LAN FS3 ------------------------------------------------ Configuration is done on one or more configuration pages dedicated to the particular kind of service. For each service you want to use, you need to appoint a Logical Printer (output control). Check the logical printer definition to make sure it does what you want it to: * Does it print to the Target Printer (Local Printer, single Network Printer or Load Balancing Pool) you want used? * If the target is a Pool, are the printers compatible with each other and listed in an appropriate order? * Are string before and/or string after (if any) correctly defined? * Are substitution string(s) (if any) correctly listed? Before assigning the string substitutions, you must create the substitution pairs. Any substitution pair can be used in any logical printer definition you want, provided, of course, that the print protocols and methods using the logical printer are appropriate. Check to be sure that the Target Printer is configured properly. * If the Target Printer chosen is the Local Printer, check the settings under "Output Control" > [Parallel Port]. * If the Target Printer chosen is a Network Printer, Netw#, then find this printer under "Output Control" > [Network Printers (NDO)] and check to be sure that the IP address (or name) is ok, and that the marked transportation protocol is one that is understood by the Target Printer and properly dimensioned for it. Do not confuse transportation protocol with the print protocol used by a service. * If the Target Printer chosen is a Pool, then check to see that all of the printers in the pool are configured properly. Configuration Tips for NDO Users -------------------------------- The configuration pages [Logical Printers 1-8] and [Substitution Strings] define the logical layer of output control. Because each Logical Printer must point to a physical printer, it is advisable to configure the physical printer(s) before going on to the logical, at least to begin with. The "System Target Printer" is where information such as the Main Status Pages are printed. Everything that is born by PR0 gets directed to the "System Target Printer".By default, the "System Target Printer" is the Local Printer. You can change this to a Network Printer if you like. G. Troubleshooting ======================== Q: I am using Windows95, and my arp command does not seem to work? A: Windows 95 does not add an entry in the arp table if this is empty. Just ping another IP device in the network, and enter the arp command again. Q: Why can't I ping the LAN FS3? A1: Make sure that - you specify the correct IP address. - the LAN FS3 has been assigned the correct IP address. - the cabling is okay. - the terminal you are using is on the same LAN segment as the LAN FS3. If you are using a route table make sure that it is set up correctly. Also make sure that the correct Gateway address has been specified in the LAN FS3. A2: If you are using the "arp-ping" method to change the IP address from factory default (0.0.0.0), the first ping saves the address to the device, and you will get a "timeout" message. Ping again, and you should get a correct reply. Q: My browser does not display the web pages correctly. What can I do? A: Check that your browser supports frames and that the use of Java Script is enabled. Using a browser without Java Script (enabled) may limit the functionality or cause web pages to be displayed incorrectly. We recommend using Windows Internet Explorer minimum release 6.0 Q: How do I perform a trace for SCS or IPDS? A: Tracing of data is started from a FTP session and stopped from a web browser. During the trace the FTP session must NOT be stopped, as the traced data otherwise will be lost. To perform a trace 1. Start an FTP session. ftp 192.168.0.227 User name: admin Password: admin 2. Set the FTP client to binary transfer mode. binary 3. Begin the trace. The name and location of the TRACE.TMP file can be changed. TN3270E trace example get /scs3270trace/scs3270trace c:\trace.tmp TN5250E trace example get /scs5250trace/scs5250trace c:\trace.tmp 4. Send a print job from the host or mainframe. 5. Wait for the print job to complete. 6. Log in to the LAN FS3 with a web browser. http://192.168.0.227 User name: admin Password: admin 7. Stop the trace by clicking the Stop XXX Trace link found under Actions. This ends the tracing and saves the trace data. 8. End the FTP session. bye 9. Log out of the LAN FS3 in the web browser by clicking the Logout link found under Actions.